Skip to main content
This document describes the installation of Kubernetes, Docker or Containerd, Mongodb applications on RHEL (Red Hat Enterprise Linux) 8.4, 8.6 and 8.9 operating systems. It can also be applied to Rocky Linux 8.4, 8.6 and 8.9 distributions.
If possible, always use the latest version of your chosen operating system and install the latest versions of servers and packages to be installed with internet access.

​
File to Download

Please contact us at [email protected] email address for the download link of Apinizer images' latest version.

For installation of Kubernetes, Docker, Mongodb and Elasticsearch applications on Rhel 8.4 and 8.6 operating systems:
File name: offlineApinizerInstallation-RedHat86.tar (1.61 GB)
Download link: https://drive.google.com/file/d/1nTcklCjpmVhPRjSiPMo-XK7nsTNtHv5o

For installation of Kubernetes, Containerd, Mongodb and Elasticsearch applications on Rhel 8.9 operating system:
File name: offlineApinizerInstallation-RHEL89.tar (1.4 GB)
Download link: https://fss.apinizer.com/index.php/s/uOXiPzhsEB8DQXJ
The instructions found in the next steps are also available in the relevant files and are shared here clearly for servers that may have limited internet access.We can use tar xvzf dosyaAdi.tar or tar xf dosyaAdi.tar commands to extract files.
First, to avoid automatic subscription error, go to the following line and set enabled 0. 
vim /etc/yum/pluginconf.d/subscription-manager.conf
enabled=0
net-tools package is installed only on Rhel-8.4 or Rhel-8.6. 
cd offlineApinizerInstallation-RedHat86
yum install -y --cacheonly --skip-broken --disablerepo=* *.rpm

​
Apinizer user is created

adduser apinizer
usermod -aG wheel apinizer
passwd apinizer

​
Firewall is turned off

sudo systemctl stop firewalld
sudo systemctl disable firewalld

​
SELinux is turned off

Let’s disable SELinux to prevent communication problems on servers. 
sudo setenforce 0
sudo sed -i 's/^SELINUX=enforcing$/SELINUX=disabled/' /etc/selinux/config

​
Swap is disabled

Let’s disable swap to prevent communication problems on nodes. For this, the following steps are done. and the swap line in /etc/fstab file is deleted. 
sudo swapoff -a
sudo vi /etc/fstab

​
IP Tables setting

Then close the vi file (:wq). 
sudo vi /etc/sysctl.d/k8s.conf
Add the following content: 
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward=1
net.ipv4.tcp_max_syn_backlog=40000
net.core.somaxconn=40000
net.core.wmem_default=8388608
net.core.rmem_default=8388608
net.ipv4.tcp_sack=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_fin_timeout=15
net.ipv4.tcp_keepalive_intvl=30
net.ipv4.tcp_tw_reuse=1
net.ipv4.tcp_moderate_rcvbuf=1
net.core.rmem_max=134217728
net.core.wmem_max=134217728
net.ipv4.tcp_mem=134217728 134217728 134217728
net.ipv4.tcp_rmem=4096 277750 134217728
net.ipv4.tcp_wmem=4096 277750 134217728
net.core.netdev_max_backlog=300000

​
Changes are saved

sudo modprobe br_netfilter
sudo sysctl --system

​
br_netfilter Module is Loaded (→ Reboot)

sudo lsmod | grep br_netfilter
sudo reboot

​
Docker Installation (Only in RHEL 8.4 and 8.6 installations)

Before starting Docker installation, the following packages need to be deleted.
yum remove podman* -y
yum remove buildah* -y

cd <InstallationDirectory>/docker
rpm -ivh --replacefiles --replacepkgs *.rpm

# Create required directories
sudo mkdir -p /etc/systemd/system/docker.service.d
sudo mkdir -p /etc/docker

# Create daemon json config file
sudo tee /etc/docker/daemon.json <<EOF
{
  "exec-opts": ["native.cgroupdriver=systemd"],
  "log-driver": "json-file",
  "log-opts": {
    "max-size": "100m"
  },
  "storage-driver": "overlay2",
  "storage-opts": ["overlay2.override_kernel_check=true"]
}
EOF

# Start and enable Services
sudo systemctl daemon-reload
sudo systemctl restart docker
sudo systemctl enable docker
sudo usermod -aG docker apinizer

​
Containerd Installation (Only in RHEL 8.9 installation)

sudo yum install -y --cacheonly --disablerepo=* required_rpms/*.rpm --skip-broken

#containerd module settings
sudo mkdir -p /etc/containerd
sudo containerd config default | sudo tee /etc/containerd/config.toml
sudo sed -i 's/SystemdCgroup = false/SystemdCgroup = true/g' /etc/containerd/config.toml

#initializing and starting the containerd module
sudo systemctl restart containerd
sudo systemctl enable containerd
systemctl status containerd

​
Kubernetes Installation

Go to apinizerOffline/kubernetes folder and run rpms. 
cd apinizerOffline/kubernetes
rpm -ivh --replacefiles --replacepkgs *.rpm
(On Master and Worker Servers) Kubernetes images in .tar format are loaded to docker. 
#If you are using RHEL 8.4 or 8.6
docker load < kube-apiserver_v1.18.20.tar
docker load < kube-proxy_v1.18.20.tar
docker load < kube-controller-manager_v1.18.20.tar
docker load < kube-scheduler_v1.18.20.tar
docker load < pause_3.2.tar
docker load < etcd_3.4.3-0.tar
docker load < coredns.tar
docker load < flannel_v0.13.1-rc2.tar
docker load < rancher.tar
docker load < rancher2.tar
docker load < metricserver.tar

#If you are using RHEL 8.9
sudo ctr --namespace k8s.io images import kube_images/kube-apiserver-v1.31.4.tar
sudo ctr --namespace k8s.io images import kube_images/kube-controller-manager-v1.31.4.tar
sudo ctr --namespace k8s.io images import kube_images/kube-scheduler-v1.31.4.tar
sudo ctr --namespace k8s.io images import kube_images/kube-proxy-v1.31.4.tar
sudo ctr --namespace k8s.io images import kube_images/pause-3.10.tar
sudo ctr --namespace k8s.io images import kube_images/etcd-3.5.15-0.tar
sudo ctr --namespace k8s.io images import kube_images/coredns-v1.11.3.tar
sudo ctr --namespace k8s.io images import kube_images/flannel-cni-plugin-v1.6.2.tar
sudo ctr --namespace k8s.io images import kube_images/flannel-v0.26.4.tar

systemctl enable kubelet && systemctl start kubelet
(On Master Node) 
#If you are using RHEL 8.4 or 8.6
sudo kubeadm init --pod-network-cidr=10.244.0.0/16 --apiserver-advertise-address=<MASTER_SERVER_IP_ADDRESS> --kubernetes-version=v1.18.20

#If you are using RHEL 8.9
sudo kubeadm init --pod-network-cidr=10.244.0.0/16 --apiserver-advertise-address=<MASTER_SERVER_IP_ADDRESS> --kubernetes-version=v1.31.4
(On Master Node) 
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown -R $(id -u):$(id -g) $HOME/.kube

kubectl apply -f kube-flannel.yml

​
Loading Apinizer Images to Kubernetes (On Worker nodes)

cd apinizerOffline/apinizerImages

#If you are using RHEL 8.4 or 8.6
docker load < manager_<APINIZER_VERSION>.tar
docker load < worker_<APINIZER_VERSION>.tar
docker load < cache_<APINIZER_VERSION>.tar
docker load < integration_<APINIZER_VERSION>.tar
docker load < portal_<APINIZER_VERSION>.tar

#If you are using RHEL 8.9
sudo ctr --namespace k8s.io images import manager-<APINIZER_VERSION>.tar apinizercloud/manager:<APINIZER_VERSION>
sudo ctr --namespace k8s.io images import worker-<APINIZER_VERSION>.tar apinizercloud/worker:<APINIZER_VERSION>
sudo ctr --namespace k8s.io images import cache-<APINIZER_VERSION>.tar apinizercloud/cache:<APINIZER_VERSION>
sudo ctr --namespace k8s.io images import integration-<APINIZER_VERSION>.tar apinizercloud/integration:<APINIZER_VERSION>
sudo ctr --namespace k8s.io images import portal-<APINIZER_VERSION>.tar apinizercloud/portal:<APINIZER_VERSION>

​
MongoDB Installation

sudo yum install -y --cacheonly --skip-broken --disablerepo=* <MONGODB_RPM_DIRECTORY>/*.rpm
rpm -ivh --replacefiles --replacepkgs <MONGODB_RPM_DIRECTORY>/*.rpm
You can continue from MongoDB Installation on Red Hat Operating System document for MongoDB configurations after installation.

​
Elasticsearch Installation

Elasticsearch package is extracted to target folder. 
sudo mkdir /opt/elasticsearch
# Move the file inside the offline installation folders.
sudo mv <ELASTICSEARCH_DIRECTORY>/elasticsearch-7.9.2-linux-x86_64.tar.gz /opt/elasticsearch/
cd /opt/elasticsearch
sudo tar -xzf elasticsearch-7.9.2-linux-x86_64.tar.gz
After moving the installation file from its directory to /opt/elasticsearch/ folder, you can perform configurations from Elasticsearch Installation on Red Hat Operating System page.

​
Apinizer Installation

You can perform Apinizer installation from Apinizer Installation and Configuration page.